Take Up Unit Bearings
Take-up units are used where shaft adjustment and belt tightening devices are required, such as conveyor applications. With a choice of locking systems, this cast-iron style is used for standard duty and pressed-steel design for low-cost, light-duty applications.
Take-up bearings are a type of mounted bearing primarily used for adjusting and maintaining conveyor belt tension. Take-up is the process of adjusting the length of the belt and chain to compensate for stretch, shrinkage, or wear, and to maintain proper tension.
Take-up bearing units are used in a range of applications including conveyer belts, fans and blowers, and food processing plants. Different frame types are available, with some units featuring a locking collar. Heavy-duty take-up bearing units are typically made of cast iron while others are made of steel for light-duty applications.
- AMI UCST211-34NP Take Up Unit Bearings
- 3-1/2 in
- 7/8 in
- AMI UCST211-32NP Take Up Unit Bearings
- QM INDUSTRIES
- 0.0
- AMI UCST210-32NP Take Up Unit Bearings
- 0.344 in
- With Lubrication Fit
- AMI UCST210-30NP Take Up Unit Bearings
- 4.13 Inch | 104.902
- 13.3 Inch | 336.8 Mi
- AMI UCST210-31NP Take Up Unit Bearings
- 0
- C0-Medium
- AMI UCST209-28NP Take Up Unit Bearings
- REXNORD
- Mounted Units &
- AMI UCST209-27NP Take Up Unit Bearings
- Cast Iron
- 2-17T
- AMI UCST209-26NP Take Up Unit Bearings
- 5.3750 in
- Lubrication Fitting
- AMI UCST208-25NP Take Up Unit Bearings
- 4012802132618
- SCHAEFFLER GROUP
- AMI UCST208-24NP Take Up Unit Bearings
- AMI
- UCST208-24NP
- AMI UCST207-23NP Take Up Unit Bearings
- 0.0
- M06288
- AMI UCST207-21NP Take Up Unit Bearings
- 0.22
- 2.2 Inch | 55.1 Mill