Tapered Roller Bearing Assemblies
Tapered roller bearings can be set at initial machine assembly to any desired axial or radial clearance. This unique feature enables a designer to control bearings to meet anticipated application operating conditions, and thereby provide optimum bearing and system performance.
Tapered roller thrust bearings consist of small tapered rollers arranged so that their axes all converge at a point on the axis of the bearing. The length of the roller and the diameter of the wide and the narrow ends and the angle of rollers need to be carefully calculated to provide the correct taper so that each end of the roller rolls smoothly on the bearing face without skidding. These are the type most commonly used in automotive applications (to support the wheels of a motor car for example), where they are used in pairs to accommodate axial thrust in either direction, as well as radial loads. They can support rather larger thrust loads than the ball type due to the larger contact area, but are more expensive to manufacture.
Ball bearings can be used, but as the paragraph mentions above they can support more load, but are more expensive to manufacture.
- TIMKEN HM926749-50000/HM926710-50000 Tapered Roller Bearing Assemblies
- 4549557032813
- 0.787 Inch | 20 Mill
- TIMKEN M241549-903A1 Tapered Roller Bearing Assemblies
- 0883450267724
- 12.5 Inch | 317.5Mil
- TIMKEN M241549-902A4 Tapered Roller Bearing Assemblies
- 0.0
- Adapter Sleeve
- TIMKEN M241549-902A3 Tapered Roller Bearing Assemblies
- 0.0
- Mounted Units &
- TIMKEN M241549-90017 Tapered Roller Bearing Assemblies
- Flange Block
- 0883450201155
- TIMKEN M241549-902A2 Tapered Roller Bearing Assemblies
- 6.135 Inch | 155.829
- 0.023 to 0.029
- TIMKEN M241547-902A2 Tapered Roller Bearing Assemblies
- Single Row Ball Bear
- No
- TIMKEN M241547-90057 Tapered Roller Bearing Assemblies
- 31171501
- Flanged
- TIMKEN M241547-90054 Tapered Roller Bearing Assemblies
- Roller Bearings
- TIMKEN
- TIMKEN 14117A-50000/14276-50000 Tapered Roller Bearing Assemblies
- 4 Inch | 101.6 Milli
- 8482.40.00.00