Angular Contact Ball Bearings
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.
single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable
The load lines of the angular contact bearings back to back are separated from the bearing shaft. It can withstand axial loads acting in both directions, but the load in each direction can only be absorbed by one bearing. Back-to-back mounted bearings provide a relatively rigid bearing configuration and can withstand overturning moments.
- FAG 506497A Angular Contact Ball Bearings
- Flanged
- Yes
- 0.984 Inch | 25 Millimeter x 2.441 Inch | 62 Millimeter x 1 Inch | 25.4 Millimeter NTN 3305BNG15 Angular Contact Ball Bearings
- 1 (Single)
- 3.15 Inch | 80 Milli
- 0.787 Inch | 20 Millimeter x 2.047 Inch | 52 Millimeter x 0.874 Inch | 22.2 Millimeter NTN 3304BG15 Angular Contact Ball Bearings
- PT INTERNATIONAL
- Mounted Units &
- 0.591 Inch | 15 Millimeter x 1.654 Inch | 42 Millimeter x 0.748 Inch | 19 Millimeter NTN 3302SC3 Angular Contact Ball Bearings
- Double Row | Single
- Non-expansion