Angular Contact Ball Bearings
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.
single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable
The load lines of the angular contact bearings back to back are separated from the bearing shaft. It can withstand axial loads acting in both directions, but the load in each direction can only be absorbed by one bearing. Back-to-back mounted bearings provide a relatively rigid bearing configuration and can withstand overturning moments.
- 0.472 Inch | 12 Millimeter x 1.26 Inch | 32 Millimeter x 0.394 Inch | 10 Millimeter NSK 7201BEAT85SUN Angular Contact Ball Bearings
- Not Applicable
- 0.866 Inch | 22 Mill
- 5.512 Inch | 140 Millimeter x 11.811 Inch | 300 Millimeter x 4.882 Inch | 124 Millimeter NTN 7328BX1WGDB/GL/4S Angular Contact Ball Bearings
- Land Riding Rubbing
- Concentric Collar
- FAG 507511 Angular Contact Ball Bearings
- Yes
- REGAL BELOIT
- 0.472 Inch | 12 Millimeter x 1.26 Inch | 32 Millimeter x 0.626 Inch | 15.9 Millimeter NSK 3201J Angular Contact Ball Bearings
- INGERSOLL RAND
- INGERSOLL RAND CO. L