Angular Contact Ball Bearings
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.
single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable
The load lines of the angular contact bearings back to back are separated from the bearing shaft. It can withstand axial loads acting in both directions, but the load in each direction can only be absorbed by one bearing. Back-to-back mounted bearings provide a relatively rigid bearing configuration and can withstand overturning moments.
- 0.787 Inch | 20 Millimeter x 1.654 Inch | 42 Millimeter x 0.63 Inch | 16 Millimeter INA 3004-B-TVH Angular Contact Ball Bearings
- Complete with Outer
- Cylindrical Roller B
- FAG HCQJ212-TVP-J30PD Angular Contact Ball Bearings
- Standard
- Rubberized
- FAG HCQJ212-TVP-J30ND Angular Contact Ball Bearings
- BUNTING BEARING CORP
- Plain Bearings
- FAG HCQJ211-TVP-J30ND Angular Contact Ball Bearings
- 15.748 Inch | 400 Mi
- 320MM Bore; Straight
- FAG HCQJ211-TVP Angular Contact Ball Bearings
- ALBION INDUSTRIES
- Bearings