Angular Contact Ball Bearings
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.
single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable
The load lines of the angular contact bearings back to back are separated from the bearing shaft. It can withstand axial loads acting in both directions, but the load in each direction can only be absorbed by one bearing. Back-to-back mounted bearings provide a relatively rigid bearing configuration and can withstand overturning moments.
- 170 mm x 360 mm x 72 mm FAG 7334-B-MP Angular Contact Ball Bearings
- REXNORD
- LINK BELT
- FAG 7322-B-JP-UO Angular Contact Ball Bearings
- 24.49
- COOPER BEARING
- FAG 7317-B-MP-UM Angular Contact Ball Bearings
- M06110
- Mounted Units &
- FAG 503739 Angular Contact Ball Bearings
- EBC
- B00308
- 4.331 Inch | 110 Millimeter x 7.874 Inch | 200 Millimeter x 2.748 Inch | 69.8 Millimeter NTN 3222NRC3 Angular Contact Ball Bearings
- 0 Inch | 0 Millimete
- 8482.20.00.00